• 信息
  • 详情
  • 联系
  • 推荐
发送询价分享好友 建材首页 建材分类 切换频道
1/5
进口膜盒式疏水阀图1

进口膜盒式疏水阀

2015-04-07 08:59疏水阀
价格 面议
发货 广东广州市付款后3天内  
品牌 德国莱克LIK品牌
库存 1000起订1台  
产品详情
 德国莱克(LIK)品牌:进口膜盒式蒸汽疏水阀的主要动作元件是金属膜盒,内充一种气化温度比水的饱和温度低的液体。装置刚启动时,管道出现低温冷凝水,膜盒内的液体处于冷凝状态,阀门处于开启位置。当冷凝水温度渐渐升高,膜盒内充液开始蒸发,膜盒内压力上升,膜片带动阀芯向关闭方向移动,在冷凝水达到饱和温度之前,疏水阀完全关闭。膜盒随蒸汽温度变化控制阀门开关,起到阻汽排水作用。有开阀温度低于饱和温度1530两种膜盒供选择。

  膜盒式蒸汽疏水阀(蒸汽压力平衡式)是目前国际上最常用的先进节能型疏水阀。膜盒式蒸汽疏水阀的反应非常灵敏,工作时阀前存有高温凝结水,无蒸汽泄漏,节能效果显著。

  膜盒式在现如今蒸汽管线中是代替低压(压力在PN25以下)热动力(圆盘式)疏水阀或(压力在PN16以下)双金属片式疏水阀的理想替代品。

 

Bellows Trap

The main acting unit of bellows trap is metal bellows, which is filled with a type of liquid with gasification temperature lower than waters saturation temperature. When the device just starts, there appears condensate with low temperature in conduits and the liquid in the bellows is in the condensed state. The trap is turned on. When the temperature of condensate water gradually goes up, the liquid in the bellows begins to vaporize and the pressure within it increases. Consequently, the film drives the valve core to move towards the closing direction. Before the condensate water reaches its saturation temperature, the trap is completely shut down. The bellows controls the opening and closing of valves in accordance with steam temperature changes so as to resist steam and discharge water. Available are two alternative bellows with opening temperature 15 or 30 lower than saturation temperature.

Bellows trap (with balanced steam pressure) is presently the most commonly used advanced energy-saving traps all over the world. As they are sensitive with high-temperature condensate deposits in front of valves while operating, they boast of remarkable energy-saving effect with no steam leakage.

Bellows trap, among all existing steam pipes, are presently the ideal substitute of low-pressure (with pressure below PN25) hot motive (disc) traps or bimetallic elements traps (with pressure below PN16).

 

优点:

1、动作速度快,零泄漏。

2、结构简单,维护方便。

3、部件全部采用合金处理的不锈钢,耐磨,耐气蚀,使用寿命长。

4、排空能力强,排水迅速,安装方式随意。

5、可以实现多个膜盒组合,适用于大的排量场合。

6、具有良好的排空气性能,不怕冻,零泄漏,背压率达到75%

 

Merits

1.Quick acting speed and zero leakage.

2.Simple structure and convenient maintenance.

3.All components made of alloy-treated stainless steel, resistant to wearing, gas corrosion, long durability.

4.Good emptying capability with quick discharge and easy installation.

5.Capable of combination of multiple bellows, suitable for large discharge.

6.Good air discharge capability, with coldness resistance, zero leakage and backpressure of 75%.

 

技术参数/Technique parameter

体压力等级

Shell pressure grade

负荷泄漏率

Load leakage rate

使用介质

Used medium

允许背压率

Permitted backpressure rate

节能效果

Energy saving effect

最大工作压差

Maximum operating pressure differential

1.62.5MPA

0%

蒸汽、凝结水

SteamCondensate water

75%

优秀

Excellence

1.6MPA

 

最小过冷度

Minimum subcooled temperature

排水方式

Drainage method

最高允许温度

Maximum allowable temperature

排空气装置

Air exhaust system

抗冻性

Freezing resistance

抗水击

Resist

0

间接方式

Indirect way

350

自动

Automatic

优秀

Excellence

适应

Adaption

主要零件材料/The materials of primary accessories

零部件名称Part and component name

材质Material

阀体、阀盖Valve bodyValve cover

锻钢、不锈钢Forged steelStainless steel

膜盒Bellows

哈氏合金Hastelloy alloy

阀座Valve seat

STL合金STL Alloy

过滤网Filtrating screen

不锈钢Stainless steel

 
举报
收藏 0
评论 0
联系方式
加关注0

广州阿泰克阀门有限公司

建材认证第10年
资料未认证
保证金未缴纳